TOSI AI CONNECT
Connect your AI assistant to Tosi in minutes.
Tosi AI Connect links your AI assistant to your Tosi environment through an MCP integration. Once it is set up, you can ask about your gateways, keys, SIMs, assets and traffic in plain language. This page shows you how to get started and gives you prompts to try.
Tosi AI Connect is part of the Standard, Professional and Enterprise subscriptions.
Watch the short setup video, then try the prompts below.
Set up the MCP integration
1
Watch the setup video and connect your AI assistant to Tosi.
2
Copy a prompt from this page and paste it into your assistant.
3
Ask follow-up questions to go deeper into what you find.
Start with these
These six prompts are a good place to start. Ask your AI tool these questions to learn more about your OT network.
-
Which of my PLCs and other OT assets are connected to the internet? For each one, show what it is talking to and what I should check first?
-
Write a short health report on my gateways that I can share with my manager. Include any gateway that went offline, when it happened, and anything else that looks unusual.
-
Show me the security events from the past seven days, ranked by risk, and tell me which ones to look at first.
-
Which keys are used least? Show the date each one last connected and how many days have passed since then.
-
Which of my gateways are online right now, and which are offline?
-
Give me a complete inventory of every device talking on the SCADA network, by OS and site, and flag anything first seen in the last 30 days.
Full prompt library
Copy any prompt as written, and replace text in brackets with your own names. Not every prompt will apply to every network.
No prompts match your search. Try a shorter word, like SIM or key.
Gateway status and health
-
Which of my gateways are online right now, and which ones are offline?
-
Which sites went offline overnight? Which key last connected to each one, and what changed beforehand?
-
Which gateways have had the least stable service connection over the last seven days?
-
Which of my sites need attention this week, and why?
-
Which gateways have GPS enabled?
-
Which gateways are the busiest on the Hub?
-
List each gateway with its full site information, including city, country and time zone.
Keys, users and access
-
How many keys do I have in total?
-
Which users are logged in right now?
-
Which gateways have more than one user logged in right now?
-
List all my master keys.
-
In a table, list each primary master key with its associated soft keys, backup keys and mobile keys.
-
Which master key has the most sub-keys?
-
Is there a single master key that spans all my other keys?
-
List the owner of each key.
-
Which gateways can each key access, and where have those keys been used in the last seven days?
-
List each gateway with the keys allowed to connect to it.
-
Rank my gateways from most used to least, and show which keys or users connect to each one most often.
-
Rank my master keys, soft keys and mobile keys from most used to least, and name the user tied to each key.
-
Which keys are used least? Show the date each one last connected and how many days have passed since then.
-
Which users have direct access to all my gateways, and which have access through the Hub?
-
List all hardware keys that belong to the same family, and name each family.
-
Which remote-access paths into the plant exist today, from vendors, integrators or operators working from home, and are they through approved channels?
Connectivity, SIMs and bandwidth
-
Which gateways are using a SIM connection right now?
-
Which carrier is each SIM connected to right now?
-
Rank my SIMs from most used to least over the last seven days.
-
Rank the signal strength (dBm) of all my SIMs from strongest to weakest.
-
How much data, in GB, has each WAN (non-SIM) port used this month, and who is the internet provider?
-
How much bandwidth is each gateway using?
Network configuration
-
Which gateways are in Client Mode?
-
List the active LAN ports on each gateway.
-
List all subnets on the [VLAN name] VLAN.
-
Are there any duplicate or overlapping IP addresses across my gateways?
Assets and network traffic
These prompts use asset and traffic data from Tosi Insight.
-
Give me a summary of the assets on my network, grouped by gateway.
-
Which assets have become unavailable in the last seven days? List them by site and country.
-
Which assets have repeatedly dropped off and come back (flapped) in the last 24 hours?
-
Have any new assets been added in the last 72 hours?
-
Which PLCs are up right now?
-
What are my top three network flows, and what is the manufacturer and model of each device involved?
-
List the top 10 talkers and how much data each one generated.
-
List the top 10 protocols and the site that is the top talker for each.
-
What are the top five insights from Tosi Insight right now?
-
Which remote sites changed behavior most in the last seven days, what changed, and do those sites have anything in common?
-
Has any data left my network for the internet in a way that looks like exfiltration? Which clients were involved?
-
Have there been any connection attempts into my network from the internet?
-
List all mobile client connections to each asset.
-
Where were all my clients located geographically over the last 72 hours?
-
Create an outbound allow-list report for each site based on the traffic Tosi Insight has observed.
-
Give me a complete inventory of every device talking on the SCADA network, by OS and site, and flag anything first seen in the last 30 days.
-
Which hosts are speaking industrial protocols such as Modbus/TCP (502) or DNP3 (20000), and are they the authorized HMI and SCADA servers?
-
What changed in baseline behavior this week? Show me new talkers, unusual volume, and peer-activity outliers, ranked by priority.
Security, troubleshooting and reporting
-
Show me the security events from the past seven days, ranked by risk, and tell me which ones to look at first.
-
Do any of my gateways have security weaknesses I should address?
-
For sites that had outages or unusual activity this week, who connected before the event, what changed, and did similar events happen at other sites?
-
Write a short health report on my gateways that I can share with my manager. Include any gateway that went offline, when it happened, and anything else that looks unusual.
-
I'm preparing for an ISO 27001 audit. What evidence about remote access and my OT network can you pull together, and where do you see gaps?
-
Is any traffic crossing between zones that shouldn’t, such as IT-to-PLC, plant-to-internet, or SMB, RDP or SSH into the control network?
-
Are there engineering-tool or PLC discovery scans on the network, such as CODESYS ports 1740–1743, and where are they coming from?
-
Can I get a summary for the utility’s risk register or assessment report?
Tosi adds new prompts to this library as Tosi AI Connect grows. Check back for updates.